build: fresh install of nixos

configuration.nix

@@ -0,0 +1,96 @@
+# Edit this configuration file to define what should be installed on
+# your system.  Help is available in the configuration.nix(5) man page
+# and in the NixOS manual (accessible by running ‘nixos-help’).
+
+{ config, pkgs, ... }:
+
+{
+  imports =
+    [ # Include the results of the hardware scan.
+      ./hardware-configuration.nix
+    ];
+
+  # Bootloader.
+  boot.loader.systemd-boot.enable = true;
+  boot.loader.efi.canTouchEfiVariables = true;
+
+  networking.hostName = "nixos"; # Define your hostname.
+  # networking.wireless.enable = true;  # Enables wireless support via wpa_supplicant.
+
+  # Configure network proxy if necessary
+  # networking.proxy.default = "http://user:password@proxy:port/";
+  # networking.proxy.noProxy = "127.0.0.1,localhost,internal.domain";
+
+  # Enable networking
+  networking.networkmanager.enable = true;
+
+  # Set your time zone.
+  time.timeZone = "Asia/Singapore";
+
+  # Select internationalisation properties.
+  i18n.defaultLocale = "en_SG.UTF-8";
+
+  i18n.extraLocaleSettings = {
+    LC_ADDRESS = "en_SG.UTF-8";
+    LC_IDENTIFICATION = "en_SG.UTF-8";
+    LC_MEASUREMENT = "en_SG.UTF-8";
+    LC_MONETARY = "en_SG.UTF-8";
+    LC_NAME = "en_SG.UTF-8";
+    LC_NUMERIC = "en_SG.UTF-8";
+    LC_PAPER = "en_SG.UTF-8";
+    LC_TELEPHONE = "en_SG.UTF-8";
+    LC_TIME = "en_SG.UTF-8";
+  };
+
+  # Configure keymap in X11
+  services.xserver.xkb = {
+    layout = "us";
+    variant = "";
+  };
+
+  # Define a user account. Don't forget to set a password with ‘passwd’.
+  users.users.rafiq = {
+    isNormalUser = true;
+    description = "Mohammad Rafiq";
+    extraGroups = [ "networkmanager" "wheel" ];
+    packages = with pkgs; [];
+  };
+
+  # Allow unfree packages
+  nixpkgs.config.allowUnfree = true;
+
+  # List packages installed in system profile. To search, run:
+  # $ nix search wget
+  environment.systemPackages = with pkgs; [
+  #  vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
+  #  wget
+  ];
+
+  # Some programs need SUID wrappers, can be configured further or are
+  # started in user sessions.
+  # programs.mtr.enable = true;
+  # programs.gnupg.agent = {
+  #   enable = true;
+  #   enableSSHSupport = true;
+  # };
+
+  # List services that you want to enable:
+
+  # Enable the OpenSSH daemon.
+  # services.openssh.enable = true;
+
+  # Open ports in the firewall.
+  # networking.firewall.allowedTCPPorts = [ ... ];
+  # networking.firewall.allowedUDPPorts = [ ... ];
+  # Or disable the firewall altogether.
+  # networking.firewall.enable = false;
+
+  # This value determines the NixOS release from which the default
+  # settings for stateful data, like file locations and database versions
+  # on your system were taken. It‘s perfectly fine and recommended to leave
+  # this value at the release version of the first install of this system.
+  # Before changing this value read the documentation for this option
+  # (e.g. man configuration.nix or on https://nixos.org/nixos/options.html).
+  system.stateVersion = "24.11"; # Did you read the comment?
+
+}

flake.nix

@@ -1,37 +0,0 @@
-{
-  description = "a minimal NixOS config using flake and home-manager";
-  
-  # Declare dependencies
-  inputs = {
-    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
-    nixpkgs-stable.url = "github:nixos/nixpkgs/nixos-24.11";
-
-    home-manager = {
-      url = "github:nix-community/home-manager";
-      inputs.nixpkgs.follows = "nixpkgs";
-    };
-  };
-
-  outputs = inputs @ { 
-    self, 
-    nixpkgs, 
-    home-manager, 
-    ...
-  }: {
-    nixosConfigurations = {
-      hekate = nixpkgs.lib.nixosSystem {
-        modules = [
-          ./hosts/hekate
-
-          home-manager.nixosModules.home-manager
-          {
-            home-manager.useGlobalPkgs = true;
-            home-manager.useUserPackages = true;
-            
-            home-manager.users.rafiq = import ./users/rafiq/home.nix;
-          }
-        ];
-      };
-    };
-  };
-}

hardware-configuration.nix

@@ -8,24 +8,24 @@
     [ (modulesPath + "/installer/scan/not-detected.nix")
     ];
 
-  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" ];
+  boot.initrd.availableKernelModules = [ "nvme" "xhci_pci" "ahci" "usbhid" "usb_storage" "sd_mod" ];
   boot.initrd.kernelModules = [ ];
   boot.kernelModules = [ "kvm-amd" ];
   boot.extraModulePackages = [ ];
 
   fileSystems."/" =
-    { device = "/dev/disk/by-uuid/98672de4-5c33-44e5-a79e-e512a2e0c7c0";
+    { device = "/dev/disk/by-uuid/fd1c608a-b327-4a2c-bd0c-ef11eec310c5";
       fsType = "ext4";
     };
 
   fileSystems."/boot" =
-    { device = "/dev/disk/by-uuid/D25D-5694";
+    { device = "/dev/disk/by-uuid/7205-0072";
       fsType = "vfat";
       options = [ "fmask=0077" "dmask=0077" ];
     };
 
   swapDevices =
-    [ { device = "/dev/disk/by-uuid/b4a0eab4-93f4-430a-83c8-66b9459185a8"; }
+    [ { device = "/dev/disk/by-uuid/b32f52d9-9801-4e2f-9321-e8894e9af768"; }
     ];
 
   # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
@@ -33,7 +33,6 @@
   # still possible to use this option, but it's recommended to use it in conjunction
   # with explicit per-interface declarations with `networking.interfaces.<interface>.useDHCP`.
   networking.useDHCP = lib.mkDefault true;
-  # networking.interfaces.docker0.useDHCP = lib.mkDefault true;
   # networking.interfaces.enp12s0.useDHCP = lib.mkDefault true;
   # networking.interfaces.wlp13s0.useDHCP = lib.mkDefault true;
 

hosts/hekate/configuration.nix

@@ -1,92 +0,0 @@
-# Edit this configuration file to define what should be installed on
-# your system. Help is available in the configuration.nix(5) man page, on
-# https://search.nixos.org/options and in the NixOS manual (`nixos-help`).
-
-{ config, lib, pkgs, ... }:
-
-{
-  imports =
-    [ # Include the results of the hardware scan.
-      ./hardware-configuration.nix
-    ];
-
-  # Use the systemd-boot EFI boot loader.
-  boot.loader.systemd-boot.enable = true;
-  boot.loader.efi.canTouchEfiVariables = true;
-
-  networking.hostName = "hekate"; # Define your hostname.
-  networking.networkmanager.enable = true;  # Easiest to use and most distros use this by default.
-
-  # Set your time zone.
-  time.timeZone = "Asia/Singapore";
-  
-  i18n.defaultLocale = "en_US.UTF-8";
-  console = {
-    font = "Lat2-Terminus32";
-    keyMap = "us";
-    useXkbConfig = true; # use xkb.options in tty.
-  };
-
-  # Enable the X11 windowing system.
-  services.xserver.enable = true;
-
-  # Configure keymap in X11
-  services.xserver.xkb.layout = "us";
-  services.xserver.xkb.options = "eurosign:e,caps:escape";
-
-  # Enable CUPS to print documents.
-  services.printing.enable = true;
-
-  # Enable sound.
-  hardware.pulseaudio.enable = true;
-
-  # Define a user account. Don't forget to set a password with ‘passwd’.
-  users.users.rafiq. = {
-    isNormalUser = true;
-    extraGroups = [ "networkmanager" "wheel" ]; # Enable ‘sudo’ for the user.
-  };
-
-  # List packages installed in system profile. To search, run:
-  # $ nix search wget
-   environment.systemPackages = with pkgs; [
-     vim # Do not forget to add an editor to edit configuration.nix! The Nano editor is also installed by default.
-     wget
-     git
-   ];
-
-  # List services that you want to enable:
-
-  # Enable the OpenSSH daemon.
-  services.openssh.enable = true;
-
-  # Open ports in the firewall.
-  # networking.firewall.allowedTCPPorts = [ ... ];
-  # networking.firewall.allowedUDPPorts = [ ... ];
-  # Or disable the firewall altogether.
-  # networking.firewall.enable = false;
-
-  # Copy the NixOS configuration file and link it from the resulting system
-  # (/run/current-system/configuration.nix). This is useful in case you
-  # accidentally delete configuration.nix.
-  system.copySystemConfiguration = true;
-
-  # This option defines the first version of NixOS you have installed on this particular machine,
-  # and is used to maintain compatibility with application data (e.g. databases) created on older NixOS versions.
-  #
-  # Most users should NEVER change this value after the initial install, for any reason,
-  # even if you've upgraded your system to a new NixOS release.
-  #
-  # This value does NOT affect the Nixpkgs version your packages and OS are pulled from,
-  # so changing it will NOT upgrade your system - see https://nixos.org/manual/nixos/stable/#sec-upgrading for how
-  # to actually do that.
-  #
-  # This value being lower than the current NixOS release does NOT mean your system is
-  # out of date, out of support, or vulnerable.
-  #
-  # Do NOT change this value unless you have manually inspected all the changes it would make to your configuration,
-  # and migrated your data accordingly.
-  #
-  # For more information, see `man configuration.nix` or https://nixos.org/manual/nixos/stable/options#opt-system.stateVersion .
-  system.stateVersion = "24.11"; # Did you read the comment?
-}
-

hosts/hekate/default.nix

@@ -1,8 +0,0 @@
-# automatically called by flake.nix
-{ config, pkgs, lib, ... }:
-
-{
-  imports = [
-    ./configuration.nix
-  ];
-}

users/rafiq/home.nix

@@ -1,17 +0,0 @@
-{ config, pkgs, ... }:
-
-{
-  home.username = "rafiq";
-  home.homeDirectory = "/home/rafiq";
-
-  home.stateVersion = "24.11"
-
-  programs.home-manager.enable = true;
-
-  # Git Configuration
-  programs.git = {
-    enable = true;
-    userName = "Mohammad Rafiq";
-    userEmail = "mohammadrafiq567@gmail.com";
-  };
-}